It is very common for chewing gum to accidentally fall into a car and then get trampled on or crushed in the seats. The problem is, the upholstery is easily damaged if the root gum is not cleaned properly. Several latest chewing gum remover equipment can work and be safely removed from car coatings, even if they have been around for a long time or are deeply rooted.
Image Source: Google
One option is to freeze the rubber until it is hard and brittle so that it can be carefully graded or removed from the pad. Several ice cubes collected in a plastic bag can stick to the affected area until the soft rubber hardens.
Although this method is effective, it can take a long time for the gums to harden. To save time, you can use canned type molded products that remove dust and more. Using this technique also means that you have less control over the affected areas.
Once brittle, the rubber can be evaluated or removed carefully with a thin but blunt tool such as an ice-scraper. If the gum has been crushed or pressed into the fibers of the upholstery, you may need to repeat the process, carefully selecting smaller, smaller pieces. Be careful not to pull any fibers from the upholstery.
If you find that there is still some sticky rubber residue that can't be extracted, tar and solvent-based adhesive products can be used to dissolve and remove it. Apply the product to a microfiber cloth and work it on the affected area.