If you are looking for an easy way to add extra power and life to your caravan battery system, a dual-battery system may be the answer. This installation process is relatively quick and simple, so be sure to read through the following guide before beginning. You can also hire experts for dual battery installation in your caravan from Klarmann Automotive Solutions.
1. Decide where you will install your dual battery system. You will need to clear some space on your van’s floor (or in the case of an RV, under the bed) in order to accommodate both batteries and the necessary charging equipment.
2. Remove any existing electrical panels or wiring that may be blocking access to the battery terminals. Loosen any screws or bolts that may hold them in place and pull out the panels if necessary.
3. Locate your van’s positive (+) and negative (-) battery cables. They will likely be attached to either side of the engine block or firewall. If not, they may run alongside each other behind one of the front seats (on a caravan), or in a more central location on an RV.
4. Connect your van’s positive battery cable to one of the new batteries’ terminals and connect your negative cable to the other new battery terminal. Make sure that both cables are fully connected and that there is no slack between them (+/–). You can now reattach the electrical panels or wiring if needed.
